How to write a training program for clients: strength program design in 11 steps

Short answer

A client's program starts with the intake: goal, training age, injuries, days per week and equipment. That sets the split, the sets per muscle group, reps with 1-2 in reserve (2-3 for beginners) and an 8-week progression rule. Intermediates usually get 9-12 weekly sets for large muscle groups, and week 8 is a deload.

A client's program in numbers

A training program for a client takes the same decisions as building a workout plan for yourself, except you make them for someone you see once or twice a week. The numbers below are for muscle growth in healthy adults.

Parameter Value Source
Block length 8 weeks. For intermediates, week 8 is a deload. how our free plans are built; research points to no single length
Weekly sets per muscle group 4-10 at the start. Give intermediates 9-12 sets for a large muscle group and 12-18 for a priority one. ACSM position stand 2026: more growth from 10 sets
Sets per muscle group in one session Usually 6-8, at most about 10-11. Remmert et al. 2025, preprint
Reps in reserve The client ends the set with 1-2 reps left (RIR 1-2). Beginners 2-3. Refalo et al. 2024: RIR 1-2 gave the same growth as failure
Days per week 2 to 5, depending on the client's schedule. Ramos-Campo et al. 2024
Rest 2-3 min after heavy compound lifts, 60-90 s after isolation. rest between sets

One example runs through the whole guide: Mike, 31, has trained for a year, wants to build muscle, has 4 days of about an hour each and a full gym. At the end he has a 4-day hypertrophy plan assigned in the app and his first week in the log.

Step 1: the client intake

The intake shapes the program more than the choice of split, because it gives you the days, the equipment and the exercises to avoid. You ask about 7 things and write the answers down where you will see them while you build the plan.

Question What it decides Mike
Main goal and one secondary goal Which plan to pick and which muscle groups get priority. Muscle, plus a stronger bench press.
Training age and how fast weights went up in recent months The client's level (step 2). One year of training, weights go up every 2-3 weeks.
Injuries, pain, conditions, medication Which exercises to swap and whether a doctor has to clear him. His elbows sometimes hurt on skull crushers.
How many days and how many minutes The weekly split and the number of sets. 4 days, 60 min each.
Equipment Which exercises you can give. Full gym.
Exercises they like and the ones they hate Whether the client sticks with the plan. Doesn't like lunges.
Sleep, work, stress How many sets they can recover from. Desk job, sleeps 7 h.

Every client fills in a health questionnaire (for example PAR-Q+) before the program. If they report heart disease, high blood pressure, pregnancy or a fresh injury, the program waits for a doctor's clearance. This is the one part of the intake you never shorten.

Step 2: the client's goal and level

You judge the level by how fast weights go up, not by years in the gym. A beginner adds weight every week or more often; an intermediate only every 1-4 weeks, usually after 6-12 months of regular training (progressive overload). Mike is an intermediate.

Level Weekly sets for a large muscle group Progression Deload
Beginner 4-10 Add weight every week. Usually not needed in the first block.
Intermediate 9-12, priority muscle group 12-18 Double progression In week 8.
Advanced Same as intermediate, with 1-2 muscle groups getting more work. Top set and back-off sets, block training Every 4-8 weeks.

One main goal per block. A program for building muscle and losing fat at the same time does neither well; in a cut you keep the same exercises and sets and change the diet. A strength goal needs a different program, with sets of 1-6 reps on the main lift at least twice a week, because strength already improves on a few sets per week (Pelland et al. 2025). Our free plans are built for muscle growth.

Step 3: training days and the weekly split

You pick the split to fit the client's schedule, because with the same number of sets, full-body training and splits gave the same gains in strength and muscle in a meta-analysis of 14 studies (Ramos-Campo et al. 2024). What matters more is how many sessions the client will actually do.

Days Split Ready plan
2 2 full-body sessions Full body 2 days
3 3 full-body sessions, or upper, lower and full body Full body 3 days, upper/lower 3 days
4 upper twice and lower twice Upper/lower 4 days
5-6 push, pull, legs, or upper/lower combined with PPL PPL 3 days, upper/lower + PPL 5 days

A client who often misses sessions is better off with a rotating plan: they do the next workout on the list instead of the one tied to Monday. Every muscle group should be trained twice a week, because at 9-12 sets one session per muscle group goes over the limit from step 4 (training frequency). For more on picking the split, read full body vs split. Mike gets upper/lower × 2: Monday, Tuesday, Thursday, Friday.

Step 4: volume, or how many sets per muscle group

You count volume in working sets per muscle group per week, not in exercises. The smallest dose with measurable growth is about 4 sets per week, and each extra set adds less than the one before (Pelland et al. 2025). A set in which a muscle group only assists counts as half (how to count sets).

The simplest start is a weekly budget:

  1. Multiply the days by the sets that fit into a session. In 60 minutes with a warm-up and rests of about 2 minutes that's 15-18 sets, more only with isolation work in supersets, so Mike has 4 × 18 = about 72 sets.
  2. Give the large muscle groups (chest, back, quads, hamstrings, glutes) 9-12 sets each, including the halves from assisting exercises.
  3. Split the rest between shoulders, arms and calves, 4-8 sets each.
  4. A priority muscle group gets 12-18 sets, and 1-2 others drop to 6-8 so the week doesn't grow (muscle priority).
  5. Spread the sets over the days so a muscle group usually gets 6-8 in one session, at most about 10-11 (sets per session).
Muscle group Mike per week Per session
Chest 11 5-6
Back 11 5-6
Quads 10 5
Hamstrings 10 5
Glutes 10 5
Shoulders, triceps, biceps 6-8 each 3-4

That's how the week adds up in the free 4-day upper/lower plan for intermediates: 75 working sets. Check the total in the weekly volume calculator; the MV, MEV, MAV and MRV zones are explained on the training volume page. The zone names come from coaching practice and their thresholds differ between sources; in SmartWorkout they are a reference point, not a research result.

Step 5: reps, RIR and starting weights

Working sets end with 1-2 reps in reserve (2-3 for beginners), not at muscular failure, because in a study 1-2 in reserve gave the same muscle growth as training to failure, with less fatigue (Refalo et al. 2024). The ACSM 2026 position stand recommends at least 2 sets per exercise and 2-3 reps in reserve (ACSM position stand 2026).

Exercise Reps RIR Rest
Heavy compound lifts (squat, deadlift, barbell press) 6-10 2 2-3 min
Other compound lifts and machines 8-12 1-2 about 2 min
Isolation 10-15 1 60-90 s

A beginner gets one more rep in reserve across the whole table, and you can shift the ranges using rep ranges.

You set starting weights without a max test. In week 1 the client leaves one more rep in reserve, while you watch technique and note the weight at which they hit the range. When you know their result for a few reps, the 1RM calculator gives you the working weight. Warm-up sets come before the first heavy lift of the day. Clients usually stop a set too early: they have about 1 more rep left than they think, and on sets above 12 reps they judge it less accurately (Halperin et al. 2022). So ask them how many reps were left after the set instead of trusting the number in the plan (RPE scale).

Step 6: exercise selection, progressions and regressions

You choose exercises by movement pattern: one exercise per pattern in a given session, 1-2 for a large muscle group. In the second session for that muscle group in the week you use the same exercise or another one from the same pattern, for example squats on Monday and leg press on Thursday. When a client can't do an exercise with good technique or something hurts, you go one step down in the same pattern instead of dropping the movement. Pain that is sharp, getting worse or lasting after the session is a job for a physical therapist, not for the program.

"Easier" means more stable and simpler to learn, not less effective for the muscle: a machine or chest support lets the client get close to failure without learning a technique first. Add isolation work for the hamstrings and side delts, because squats and leg presses load the hamstrings too little and bench pressing barely touches the side delts, for example Seated Leg Curl. Mike doesn't like lunges, so his lower days get squats and leg presses, and instead of skull crushers he does Rope Triceps Pushdown, which is easier on the elbows.

Step 7: week-to-week progression

Progression is a rule the client applies on their own after every session, not a decision you make once a week. For intermediates the simplest is double progression: when every set of an exercise reaches the top of the range at the planned RIR, the weight goes up by the smallest step next time and the reps go back to the bottom of the range.

After the session Next
All sets 4 × 10 at RIR 2, range 8-10 Add 2.5 kg to the bar and start from 4 × 8.
Sets of 10, 9, 8 Keep the weight and aim for 10 on every set.
The same result for the third week Swap the exercise for another from the same pattern, or take off 10% and work back up the rep range.
Most exercises drop for 2 sessions Do a lighter week right away (step 8).

With dumbbells the next weight is often a jump of more than 10%, so reps go up there first. Sets stay fixed during a block; if a muscle group stalls despite progression, it gets 1-2 more sets only in the next 8-week block. The other method, adding sets week by week at the same weight, also works, but week 1 then has to be shorter than week 7.

Step 8: the deload and the end of the block

For intermediates, week 8 is a deload: about 60% of the working sets at RIR 4, same exercises and weights. It's unknown whether regular deloads build more muscle in the long run than training without them, but they give you a fixed point to change the program. A beginner usually trains week 8 like any other and gets a deload only once weights go up every few weeks.

After the deload you start the next mesocycle, the next 8 weeks:

  • exercises that stay start from week 7 weights, not week 1; new exercises start with a week of one extra rep in reserve;
  • exercises that stalled for 3 weeks get swapped within the same pattern (the table in step 6);
  • muscle groups that aren't growing get 1-2 more sets, and you take the same number of sets away elsewhere;
  • once per block you compare results at the same weights and reps in reserve (step 11).

The longer horizon, several blocks with different goals, is covered in periodization. For a typical client, a repeated 8-week block with a few exercises swapped is enough.

Step 9: writing the program faster than from scratch

You need a program from scratch once; after that you start from a ready base and change what the intake showed. The fastest routes:

Starting point When What you change
A free plan Your first program for a typical client. The exercises to the ones from step 6 and the sets for priority muscle groups.
Your own template Clients with a similar training age and the same number of days. The exercises and starting weights.
An AI plan You want a first version in a few minutes. Check the sets per muscle group and the exercises like in any other plan.
A plan from a spreadsheet Your programs live in Excel. Paste the text and fix the exercise names the app didn't recognize.

You check every base against the same numbers: sets from step 4, the per-session limit, RIR, rest. With an AI plan you also check that the exercises fit the client's equipment and that every set has an RIR (ready-made, your own or an AI plan).

Step 10: assigning the program to your client

An assigned program sits on your client's phone with the weights, ranges, RIR and rest, so they don't have to ask what to do during the session. Before you assign it, go through the program as the client will see it: does the day name say what they're doing today, is there a note on exercises that cause pain, does week 1 have one more rep in reserve.

When you coach several clients on a similar program, you copy the template and change only the exercises and weights. One "Upper/Lower 4 days" template with three exercise versions for different equipment covers most intermediates.

Step 11: tracking the program and adjusting it

You judge the program by what the client actually did, not by what they were supposed to do. Once a week you look at 3 things:

  1. How many sessions from the plan they completed. Below 75% (for example 3 out of 4) for two weeks means the program is too long or the days don't fit: shorten the sessions or move the days.
  2. Whether the weight or reps go up on the main lifts at the same RIR.
  3. Whether the reps in reserve in their notes match the plan. RIR 0 on every set means the weights are too heavy; RIR 4 when 2 was planned means too light.

At the end of the block you compare week 2 with week 7 on 3-4 main lifts. For a muscle-building goal, add body weight once a week at the same time of day, plus girths and photos at the start and the end of the block. If the numbers go up, the next block keeps the same skeleton; if they stall, change sets or exercises as in step 8. Strength standards show your client's real strength level and help you set targets for the next blocks.

Common mistakes in client programs

  1. Programming from your own training. A client with 4 fewer years of training gets your 20 sets for chest. Start from the table in step 2 and add only when weights stall.
  2. Sessions that are too long. An 80-minute plan for someone with 60 free minutes ends with half the session skipped. Count the sets with rest before you assign the plan.
  3. Changing the program every 2-3 weeks. That's too early to see what works. Only swap an exercise that hurts or has stalled for three weeks.
  4. No progression rule. A plan that says "4 × 10" with no rule ends with the same weight for 8 weeks. Write the rule from step 7 on every exercise or in the plan description.
  5. The same reps in reserve for everyone. A beginner is still learning technique, and a set close to failure breaks it down. Give them RIR 2-3 and ask how many reps were left after each set.

What research says about program design

Study Type and sample Result Limitation
Pelland et al. 2025 meta-analysis of 67 studies muscle growth rises with the number of sets, but each extra set adds less; about 4 sets per week give measurable growth mostly young men, studies of about 10 weeks
ACSM position stand 2026 overview of reviews at least 2 sets per exercise, 2-3 reps in reserve, more growth from 10 weekly sets general advice, not split by level
Ramos-Campo et al. 2024 meta-analysis of 14 studies splits and full-body training give the same gains at the same number of sets short studies
Halperin et al. 2022 meta-analysis, 12 studies, 414 people reps in reserve underestimated by 0.95 reps on average; more accurate close to failure and at 12 reps or fewer results vary widely between studies
Refalo et al. 2024 study, trained people, 8 weeks RIR 1-2 and training to failure gave similar muscle growth one group, short duration
Remmert et al. 2025 meta-analysis, preprint above about 11 sets per muscle group in one session, more sets gave no measurable advantage not peer reviewed, the authors don't treat it as a limit
Roberts et al. 2020 meta-analysis, 10 studies of muscle growth women and men on the same training gained muscle similarly compares effect sizes, not growth in centimeters

It's unknown how to set the right volume for a specific person other than by watching their results from block to block.

How to run a client's program in SmartWorkout

You build and assign a client's program in SmartWorkout's coach mode, and your client trains it in their own app. The steps of this guide work like this:

  1. Intake: "Forms" › "Initial Questionnaire" sends the questions to your client, and you see the answers in their profile.
  2. Program: "Plans" › new plan. You set the goal, level, "Load Indicator" (RIR, RPE or %1RM), blocks and weeks; copy a week with "Clone".
  3. Plan day: exercises, rep ranges, RIR, tempo and rest on every set.
  4. Assigning: "Assign to Trainee" in the plan, or from the client's profile.
  5. Tracking: the client's log shows every workout from the plan, and the plan card shows which week is running and how many sessions they did.

Training with a coach covers working with a client in detail, and the plan form is explained in plan creator. Take a ready base from the free plans, and paste a plan from a spreadsheet with plan import. Everything about coach mode is on the SmartWorkout for coaches page.

On a paid coach plan, the volume table in the plan form shows each muscle group's weekly sets against the MV, MEV, MAV and MRV zones, so you check step 4 without a calculator.

Log it in SmartWorkout

A free workout log for iPhone and Android: sets, RIR, tempo, exercise groups and plans.

app-storegoogle-play

Questions

How long does it take to write a program for a client?

The first program from scratch takes the longest. The next ones go faster when you start from a template or a free plan and change only the exercises, the sets for chosen muscle groups and the days.

Does every client need a different program?

Clients with the same training age and number of days can share a skeleton. The exercises (equipment, pain, technique), the 1-2 priority muscle groups and the starting weights differ, so you still go through each copy for the person who gets it.

How often should I change a client's program?

Every 8 weeks, after the deload. Within a block you only swap an exercise that hurts or has stalled for three weeks and leave the rest alone, because otherwise you can't see what works.

Spreadsheet or app for client programs?

A spreadsheet is enough for a few clients who type in their own results. With more clients, most of your time goes into copying weights from messages into the sheet, while an app records them during your client's workout.

How do I write a program for a female client?

The same way as for a man: in studies, women and men on the same training gained muscle at a similar rate. Women ask for glute priority more often, so that muscle group gets more sets at the expense of others.

Sources

  1. Currier BS, D'Souza AC, Singh MAF, et al. American College of Sports Medicine Position Stand. Resistance Training Prescription for Muscle Function, Hypertrophy, and Physical Performance in Healthy Adults: An Overview of Reviews. Med Sci Sports Exerc. 2026;58(4):851-872.
  2. Pelland JC, Remmert JF, Robinson ZP, et al. The Resistance Training Dose Response: Meta-Regressions Exploring the Effects of Weekly Volume and Frequency on Muscle Hypertrophy and Strength Gains. Sports Med. 2026;56(2):481-505 (online 2025).
  3. Halperin I, Malleron T, Har-Nir I, et al. Accuracy in Predicting Repetitions to Task Failure in Resistance Exercise: A Scoping Review and Exploratory Meta-analysis. Sports Med. 2022;52(2):377-390 (online 2021).
  4. Ramos-Campo DJ, Benito-Peinado PJ, Andreu-Caravaca L, et al. Efficacy of Split Versus Full-Body Resistance Training on Strength and Muscle Growth: A Systematic Review With Meta-Analysis. J Strength Cond Res. 2024;38(7):1330-1340.
  5. Refalo MC, Helms ER, Robinson ZP, et al. Similar muscle hypertrophy following eight weeks of resistance training to momentary muscular failure or with repetitions-in-reserve in resistance-trained individuals. J Sports Sci. 2024;42(1):85-101.
  6. Remmert JF, Pelland JC, Robinson ZP, et al. Is There Too Much of a Good Thing? Meta-Regressions of the Effect of Per-Session Volume on Hypertrophy and Strength. SportRxiv. 2025 (preprint, not peer reviewed).
  7. Roberts BM, Nuckols G, Krieger JW. Sex Differences in Resistance Training: A Systematic Review and Meta-Analysis. J Strength Cond Res. 2020;34(5):1448-1460.